Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo
Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo

Pacific Core P6 DP-D5 Plus Distro-Plate with Pump Combo

Out of stock
P/N
CL-W344-PL00SW-A
USD$379.99
Pacific Core P6 DP-D5 Plus is specifically designed for the Core P6 Chassis, and it is a Modder level reservoir integrated with a high-performance D5 pump.
 

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

Blink
Heartbeat

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

Radar

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

Raindrops

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

RGB Spectrum

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

Swirl

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

Wave

Vivid RGB Lighting from Every Angle

Controlled by the patented TT RGB PLUS 2.0 Software and the app, P6 DP-D5 Plus’s 18 LEDs light up the distro plate with stunning customizable RGB lighting

 
Straightforward Installation
Core P6 DP-D5 Plus simplifies the tube structure of liquid cooling and delivers exceptional space savings for the Core P6 chassis.
 
 
 

TT RGB PLUS 2.0 Software

The new version of Thermaltake’s TT RGB PLUS patented software, providing more lighting effects and PC monitoring functions.

Caution:
TT RGB PLUS and TT RGB PLUS 2.0 will overwrite one another; users can only install one version of TT RGB PLUS 1.0 or 2.0.
This product only supports TT RGB Plus 2.0.

DOWNLOAD NOW DOWNLOAD USER MANUAL

NeonMaker

The NeonMaker is a new and innovative approach to adjusting the RGB lighting on the some of our products, allowing users to customize lighting profiles and orchestrate their own light shows.
Personalize Riing Quad Fans, Riing Trio Fans, Distro Case, Floe DX RGB AIO, and TOUGHRAM RGB with NeonMaker!

NEONMAKER MICROSITE DOWNLOAD NEONMAKER

Works with Amazon Alexa

All Thermaltake TT RGB PLUS products support Amazon Alexa Voice Service, allowing you to give voice commands to the Alexa-enabled devices.

LEARN MORE

TT AI Voice Control

Give you full control over the TT RGB PLUS products with your voice. “SyncALL, Say”Hello TT”.

Note: TT AI Voice control, Razer Chroma and Amazon Alexa requires the use of at least one TT RGB PLUS software-enabled product to function.

Cautions

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks

  • To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  • Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  • Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.
More Information
P/N CL-W344-PL00SW-A
Dimension (s) 458 (L) x 170 (W) x 85 (H)
Material PMMA
Capacity 350 ml
Maximum head 15 feet (4.5m)
Maximum Flow Rate 1135 L/h
Maximum pressure 50 PSI
Input Voltage 12 V / 5 V
Power Input 37 W / 3.5 W
Connector 4 Pin
Pump Speed P1: 1,800 RPM
P2: 2,550 RPM
P3: 3,300 RPM
P4: 4,050 RPM
P5: 4,800 RPM
Screw Thread G 1/4
Parts Stopper *5 (G 1/4 )
Interface USB 2.0 connectors (9 Pin)
System compatibility Windows 10 / 11

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date