Thermaltake New Toughpower PF1/GF1 ARGB Power Supply Power Your Build with Rich Lighting
Thermaltake New Toughpower PF1/GF1 ARGB Power Supply
Power Your Build with Rich Lighting
Taipei, Taiwan－May 30th 2019－Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear and Enthusiast Memory solutions introduces the New Toughpower PF1 ARGB Platinum Series and Toughpower GF1 ARGB Gold Series Fully Modular with 80 PLUS Certified (Platinum and Gold efficiency) Power Supply Units. The new lineup highlights premium components, coming with patented 16.8-million-color Riing Duo 14 RGB fan to give seven lighting modes (Wave, Spiral, Flow, Heartbeats Ripple, Full lighted, Spectrum and a LED Off mode) by pressing the RGB Lighting button and built-in memory function. These two series also have the compatibility with RGB-support motherboard function and 10 years warranty.
For more information on Thermaltake Group please visit the Thermaltake booth at COMPUTEX Taipei 2019 (Taipei Nangang Exhibition Center, 4th floor, Booth #M120) or visit https://computex.thermaltake.com/2019/.
The Toughpower PF1 ARGB Platinum Series features patented 16.8 million-color Riing Duo 14 RGB fan which points out its hydraulic bearing, silent and stable operation. The meticulously ARGB side panel design shows gorgeous illumination from different angle. Apart from PF1 ARGB Series, The Toughpower GF1 ARGB Gold Series is also marked by addressable RGB Riing Duo 14 Fan and RGB synchronization for 5V RGB motherboard compatibility. These two fully modular series are equipped with Smart Zero Fan to minimize undesired noise, <30mV low ripple noise design and 100% Japanese made capacitors to ensure reliability. The PSU voltage regulation is set to no more than ±2% for major rails to demonstrate the best performance. As to the cable, its low-profile flat cable provides easier cable management to reduce clutter and increase airflow inside the chassis. Both two ARGB power supply series permit aesthetic appeal and unbeatable yet mute operation for all kinds of chassis.
Features of the Thermaltake Toughpower PF1/GF1 ARGB Series
Be Seen from Various Angles
The built-in Riing Duo 14 RGB Fan features dual rings with 18 addressable LEDs not only show great light coverage, the uniform color and effect can also paint your build with 16.8 million colors. Not to mention the unique see-through Side Panel design shows the fascinating illumination from both sides and adds the amazing effect on your build.
Sync with Motherboard ARGB Software
Toughpower PF1/GF1 ARGB Series supports motherboards with a 5V addressable RGB header from ASUS, GIGABYTE, MSI, and ASRock. Users get to control the lights directly from the software released by those brands without installing any extra lighting software or controllers.
Riing Duo 14 RGB Fan with Pre-installed Color Effects
Riing Duo 14 RGB fan blade is designed for high static pressure requirements of demanding applications; the concentrated compression blades are optimized to enhance static pressure for an impressive cooling performance. The pre-installed LEDs also provide diversifying 7-mode variations.
Ultra Quiet Smart Zero Fan
Smart Zero Fan ensures zero noise when the fan operates below 20% working load to minimize audible noise. The fan will operate when the power supply working load over 20%. A switch is provided for those who prefer the fan to spin constantly.
< 30 mV Low Ripple Noise
All ripples are lower than 30mV for high stability on +12V, +5V, or +3.3V from 0% to 100% load to ensure a high quality power supply. Low ripple noise will keep your performance-critical components, such as high-end graphics cards, to operate reliably for longer.
Extremely Strict Voltage Regulation < ±2%
The voltage regulation of the PSU is set to no more than ±2% for major rails to meet the highest performance. The strict voltage regulation of the Toughpower PF1/GF1 ARGB Series is better than Intel’s standard ±5% for major rails and ±10% for -12V.
100% High Quality Japanese 105°C/221°F Capacitors
100% high quality 105 °C (221 ° F) Japanese made capacitors which greatly improve the durability and offer the highest stability and reliability.
High Amperage Single +12V Rail & DC to DC Design
Toughpower PF1/GF1 ARGB Series are both equipped with a powerful single +12V rail, eliminating the limitations caused by voltage distributions, delivering the power your CPU and VGA demand in any situations. Besides, with DC to DC design, the unit optimizes maximum energy harvest for computer systems, providing the best compatibility, conversion efficiency and stable voltage output.
Fully Modular Low-Profile Flat Cable
Fully modular Toughpower PF1 ARGB Platinum and GF1 ARGB Gold offer cable selection for users while powering the system at an advantageous voltage. Low-profile flat black cable can make cable management easier, reduce clutter and increase airflow inside the chassis.
80 PLUS Certified and Coffee Lake Ready
The 80 PLUS for PF1 ARGB Platinum Series delivers up to 92% efficiency under real-world load conditions to promise lowest power losses. And GF1 ARGB Gold Series can achieve up to 90%, too. Additionally, two ARGB power supply series has been optimized to work with Intel’s latest, Ninth-generation Coffee Lake processors to achieve maximum energy saving.