Features Application for 80x80 mm CPU Cooler or Case Fan

Detail Information
Function 1: Connect to motherboard It provides two kinds of lighting statuses, showing as the following pictures
HDD Idle: Blue E-LED Light HDD Access: Blue + Red E-LED Light	Find out the position of “Power E-LED” & “HDD E-LED “ on the M/B. Remove the original “Power E-LED” & “HDD E-LED” connectors from the M/B. Plug the CoolMod “Power E-LED” connector (3-pin) into the “PE-LED” position of the M/B. Plug the CoolMod “HDD E-LED” connector (2-pin) into the “HDD E-LED” position of the M/B. The CoolMod E-LED installation is finished.
Function 2: Connect to power supply by attached electric wire In this status, the blue & red E-LED keep lighting. Showing as the following picture
Connect the CoolMod “Power E-LED” connector (Dupond-3pin) to the attached electric wire. Connect the CoolMod “HDD E-LED” connector (Dupond-2pin) to the attached electric wire as well. Connect the 4-pin of attached electric wire to the power supply.