TPX-775M

   

Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.91 standards.
80 PLUS Bronze certified - provide up to 88% effective power conversion to cut- down electric cost.
24/7 @ 50 °C: Guaranteed to deliver 575W / 675W / 775W / 875W continuous output power.
Double-forward switching circuitry: compared with traditional circuitry, double- forward switching circuitry offers low power loss and high reliability.
Unparalleled DC to DC converters for 3.3V and 5V outputs to reach high efficiency.
S.P.T. indicator: PSU status monitor with 3-mode LED (standby / PG signal / temperature).
12Vin1: single +12V rail design providing up to 48A / 56A / 64A / 72A.
High quality Japanese capacitors: ensure superb performance and reliability.
Solid state capacitors: great stability at higher operating temperatures, frequencies and currents.
Fan Delay Cool Technology: allow fan to continue to operate after system shuts-down to ensure all components are properly cooled.
Multi-GPU ready: support up to two PCI-E 6+2pin & two PCI-E 6pin for PCI-Express graphic cards.
Auto switching circuitry for universal AC input from 90-264V.
Active Power Factor Correction (PFC) with PF value of 0.95 at full load.
High reliability: MTBF>120,000 hours.
DIMENSION: 5.9"(W) x 3.4"(H) x 6.3" (L); 150mm(W) x 86mm(H) x 160mm(L).
Built in industrial-grade protections: Over Current, Over Power, Over Voltage, Under Voltage, and Short-Circuit protections.
Safety / EMI Approvals: UL/ CUL, TUV, FCC, CE, BSMI and GOST certified.


 

     

Industrial-grade capacitors provide uncompromised performance and reliability.
 

     

S.P.T. indicators enable the user to check the power supply status themselves by viewing the standby, PG signal and temperature LED.

Powerful single +12V rail provide best performance for PCs with high-performance components.

With DC to DC converter of +3.3V & +5V circuit built in, the power supply provides superior dynamic response and great system stability.


 
 

Cable management design improves internal airflow and reduce clutter.
 
 
 
 
 
 
 
-C6 State CPU Mode
CPU load range from Max. to only 1W.

-Nvidia® & ATI/AMD multi graphic cards configuration
Hybrid mode  will cause graphic cards load range from Max. to only 1W.
New Toughpower XT series are able to maintain an ultra tight DC regulation to support the C6 state CPU mode and the hybrid graphic card power saving mode by its ZERO LOAD (0W) Design.
 
 
 
 
 

       
Main Power
Connector (24Pin) x 1
ATX 12V (4+4Pin) x 1
EPS 12V Connector (8Pin) x 1
PCI-E 8Pin (6+2Pin) x 2
       
       
SATA connector (5Pin) x 8
Peripheral Connector (4Pin) x 6
FDD Connector (4Pin) x 1
PCI-E Connector (6Pin) x 2
       
 
       
 
 
 
 
 

To better protect your power supply, FanDelayCool, enable the 14cm fan continue to operate (up to 30 seconds) after system shutdown. This is to assure all components inside the power supply to be thoroughly cooled off and gain the longest lifetime.

Unlike traditional power supplies, temperature inside Toughpower XT does not rise after system shutdown. The most important purpose of FanDelayCool is to thoroughly cool down your power supply and extend the lifetime of all the components inside. See the test results below: