Compatible with Thermaltake's L.C.S( Liquid Cooling System) and components
Liquid temperature and level monitor in the 5.25" drive bay.
 
Easily monitor the liquid temperature and level from LCD panel in the front.
Built-in liquid temperature and level alarm.
-The signal will flash,error beeps will occur and the LCD panel will change colors from
   blue to red when the coolant is below the "low" mark.
-The LCD panel will change colors from blue to red if the temperature of the system
   is higher than the set alarm temperature.
Fast response probe:
 
-Temperature probe can detect the water temperature in real-time.
 
-Liquid level probe can detect the coolant level in real-time.
User Friendly:
 
The temperature probe can be put at anywhere within the LCS loop
Quick Install Connectors:
 
The temperature probe connector is suitable for tubing of ID 6.4mm(1/4”)/9.5mm(3/8”)



 
5.25” driver bay temperature and liquid level display panel 350 CC liquid tank with liquid level sensor
Temp. probe for ID 6.4 mm(1/4”) and 9.5mm(3/8”) tubing with temperature sensor Quick install connectors for ID 6.4mm(1/4”) and ID 9.5mm(3/8”)
P500 pump with 500L/h flow rate  
 
 
Functions of LCD panel
ON/OFF
  Power on or power off switch
Water temp:
  The current temperature of your liquid cooling system.
Alarm temp:
  The alarm temperature that you have set
Alarm set:
  Reset the alarm temp
RESET:
  Press the bottom to stop the error beeps and the signal's flash if the liquid level is below the low mark
° C/ ° F:
  Celsius and Fahrenheit display switch
Low water:
  The signal will flash,error beeps will occur and the LCD panel will change colors from blue to red when the coolant is below the "low" mark.

Monitor switch:
   
  Note:
When the liquid level is below the “low “ mark , the signal will flash,error beeps will occur and the LCD panel will change colors from blue to red for ten minutes if you do not press the ”RESET” button.

  Note:
When the water temperature of your system is higher than the setting temp, the color of the panel will change from blue to red



Recommendation
  These are the recommended locations for the placement of the LCD panel,temperature probe and liquid tank
 
Outlet of CPU waterblock
Outlet of radiator
Outlet of liquid pump


 Apply to Thermaltake BigWater 735 and Armor chassis for optimal thermal solution
  These are the recommended locations for the placement of the LCD panel,temperature probe and liquid tank
 
12cm radiator CPU waterblock
P500 liquid pump 350cc liquid tank
Temp probe 5.25” driver bay temperature and liquid level display panel