Features Application For AMD and Intel system including Pentium 4 Silent fanless PSU, 0dB Design No cooling fan is required, stay cool without suffering the fan noise Heat pipe technology, ensure the best performance Huge Heatsink and Extruded aluminum casing , transfer the heat quickly Muti-direction Vent,transfer heat to exterior through natural convection The 350-Watt PSU ensures excellent voltage stability With Passive PFC (Power Factor Correction) Intelligent Cable management Thermal overload, short circuit, current overload, over voltage-protection

Detail Information
Total Output Connector
20-pin Main Connector x1 4-pin +12V Power Connector X1 4-pin Peripheral Power Connector X9 4-pin Floppy Drive Connector X2 4-pin SATA Connector X2
Technology Features
	Heatpipe with pure copper fins Huge Copper heatsink , transfers all heat to the exterior through natural convection		Aluminum Housing
	Multi-Direction Air Vent		transfer heat to exterior through natural convection
Cable Application
	Dual Serial ATA power connectors	Intelligent Cable Management: Colorful cable sleeving Optimum air-flow
Installed View
OUTPUT +5V +3.3V +12V -5V -12V +5VSB Max. Load 22A 16A 14A 0.3A 0.8A 2.0A Min. Load 0.3A 0.5A 1.0A 0.0A 0.0A 0.0A Load Reg. +5% ~ -5% +5% ~ -5% +5% ~ -5% +10% ~ -10% +10% ~ -10% +5% ~ -5% Ripple V(p-p) 100mV 100mV 200mV 240mV 240mV 100mV

Detail Specifications
P/N	W0050	Dimensions
PFC	Passive PFC	Unit Size	150 x 140 x 85mm
Maximum Power	350 Watts
Switches	ATX Logic on-off additional power rocker switch	Net Weight	2.65kg (5.8lb)
Color	Black
Heatpipe	Copper Tube 6mmx 5	Input
Heatsink	Copper Fin and AL sink	Input Voltage	115 VAC / 230 VAC
Noise	0 dBA
P. G. Signal	100-500ms	Input Frequency Range	47-63 Hz
Over Voltage Protection recycle AC to reset	+5V trip point < +7.0V +3.3V trip point < +4.3V +12V trip point <+15.6V
		Input Current	2.5~5.0A
		Hold-up Time	12ms
		Efficiency	> 70%

Logo introduction
	Serial ATA		Copper Fin		Heatpipe
	Performance		Cable Sleeving		Multi-Direction Vent